Quick Reference — To scan a card with the Burroughs scanner

athenaCollector

 

To scan cards using the Burroughs check and ID card scanner, the device must have approximately 2 inches of room behind it. The device comes with an extender that ensures the required spacing.

1. Display any of these pages:
• Add/Update Insurance Card Image page: On the Quickview or Check-in page, under the Insurances heading, click Add card image next to the Insurance Card Image field.
• Prescription Card Image page: On the Quickview or Check-in page, under the Insurances heading, click Add card image next to the Prescription field.
• Add/Update Driver's License page: On the Quickview or Check-in page, under the Registration Information heading, click Add card image next to the Driver's license image field.
2. Click the Scan button.
3. Insert the card into the device's left slot. The front of the card must face outward.
   
   The card moves through the device.
4. When the card stops moving, remove the card from the Burroughs device.
   The scanned image is displayed on the Add/Update Insurance Card Image, Prescription Card Image, or Add/Update Driver's License page.
5. Validate this image against the patient's card.
6. Click the Save button.